Adafruit SGP40 Air Quality Sensor Breakout, VOC Index, STEMMA QT / Qwiic 4829

19.749954

EUR 19,75

incl. 19 % VAT excl. shipping costs

weight 0,01 KG

Available, enough stock

Adafruit SGP40 Air Quality Sensor Breakout, VOC Index, STEMMA QT / Qwiic 4829

The SGP40 has a 'standard' hot-plate MOX sensor, as well as a small microcontroller that controls power to the plate, reads the analog voltage and provides an I2C interface to read from. Unlike the CCS811, this sensor does not require I2C clock stretching. We currently have an Arduino library with examples of reading the raw value and also running the Sensirion algorithm to calculate VOC index but do not have Python support (the Sensirion library is in C and requires a port)

This is a gas sensor that can detect a wide range of Volatile Organic Compounds (VOCs) and H2 and is intended for indoor air quality monitoring. The SGP40 is the next generation after the SGP30, but does not give TVOC/eCO2 values out like the SGP30. Instead, raw signal from the sensor is processed using their software algorithm to give an overall 'air quality' value form 0 to 500.

Please note, this sensor, like all VOC/gas sensors, has variability, and to get precise measurements you will want to calibrate it against known sources! That said, for general environmental sensors, it will give you a good idea of trends and comparison.

Another nice element to this sensor is the ability to set humidity compensation for better accuracy. An external humidity sensor is required and then the RH% is written over I2C to the sensor, so it can better calibrate the MOX sensor reading and reduce humidity/temperature-based variations..

Nice sensor right? So we made it easy for you to get right into your next project. The surface-mount sensor is soldered onto a custom made PCB in the STEMMA QT form factor, making them easy to interface with. The STEMMA QT connectors on either side are compatible with the SparkFun Qwiic I2C connectors. This allows you to make solderless connections between your development board and the SGP40 or to chain it with a wide range of other sensors and accessories using a compatible cable. QT Cable is not included, but we have a variety in the shop

Customers also purchased

Tiny85 Board with ATtiny85, MicroUSB, Digispark and Arduino IDE compatible

Tiny85 Board with ATtiny85, MicroUSB, Digispark and Arduino IDE compatible

EUR 4,49

incl. 19 % VAT excl. shipping costs

MLX90614ESF, IR Temperature Sensor for Non-contact Measurements, I2C

MLX90614ESF, IR Temperature Sensor for Non-contact Measurements, I2C

EUR 12,95

incl. 19 % VAT excl. shipping costs

Adafruit Mini PiTFT, 135x240 Color TFT Add-on for Raspberry Pi

Adafruit Mini PiTFT, 135x240 Color TFT Add-on for Raspberry Pi

EUR 20,78

incl. 19 % VAT excl. shipping costs