Skip to product information
1 of 1

Genuino

Genuino Starter Kit [English]

Genuino Starter Kit [English]

Regular price €95,00 EUR
Regular price Sale price €95,00 EUR
Sale Sold out
Tax included. Shipping calculated at checkout.

Genuino Starter Kit is the ultimate educational solution for learning how to use the Genuino platform. It contains a Genuino Uno Rev3 board, a collection of sensors and actuators, and a book that guides the absolute beginners from their very first steps with electronics into the world of interactive and sensing objects. The Genuino Starter Kit is a great gift for kids ages 9 to 99!

Genuino Starter Kit contains a full color 170 pages book with the following projects:

  1. GET TO KNOW YOUR TOOLS: an introduction to the basics 
  2. SPACESHIP INTERFACE: design the control panel for your starship 
  3. LOVE-O-METER: measure how hot-blooded you are 
  4. COLOR MIXING LAMP: produce any color with a lamp that uses light as an input 
  5. MOOD CUE: clue people into how you're doing 
  6. LIGHT THEREMIN: create a musical instrument you play by waving your hands 
  7. KEYBOARD INSTRUMENT: play music and make some noise with this keyboard 
  8. DIGITAL HOURGLASS: a light-up hourglass that can stop you from working too much 
  9. MOTORIZED PINWHEEL: a colored wheel that will make your head spin 
  10. ZOETROPE: create a mechanical animation you can play forward or reverse 
  11. CRYSTAL BALL: a mystical tour to answer all your tough questions 
  12. KNOCK LOCK: tap out the secret code to open the door 
  13. TOUCHY-FEEL LAMP: a lamp that responds to your touch 
  14. TWEAK THE GENUINO LOGO: control your personal computer from your Genuino 
  15. HACKING BUTTONS: create a master control for all your devices! 

Genuino Starter Kit includes: 

1 Projects Book (170 pages) 
1 Genuino Uno Rev3 
1 USB cable 
1 Breadboard 400 points 
70 Solid core jumper wires  
1 Easy-to-assemble wooden base 
1 9v battery snap  
1 Stranded jumper wires (black)  
1 Stranded jumper wires (red)  
6 Photoresistor [VT90N2 LDR]  
3 Potentiometer 10kOhms 
10 Pushbuttons 
1 Temperature sensor [TMP36] 
1 Tilt sensor 
1 alphanumeric LCD (16x2 characters)  
1 LED (bright white) 
1 LED (RGB) 
8 LEDs (red) 
8 LEDs (green) 
8 LEDs (yellow) 
3 LEDs (blue) 
1 Small DC motor 6/9V 
1 Small servo motor 
1 Piezo capsule [PKM17EPP-4001-B0] 
1 H-bridge motor driver [L293D] 
1 Optocouplers [4N35] 
2 Mosfet transistors [IRF520] 
5 Capacitors 100uF 
5 Diodes [1N4007]  
3 Transparent gels (red, green, blue) 
1 Male pins strip (40x1)  
20 Resistors 220 ohm 
5 Resistors 560 ohm 
5 Resistors 1k ohm 
5 Resistors 4.7k ohm  
20 Resistors 10k ohm 
5 Resistors 1M ohm 
5 Resistors 10M ohm 

Documentation

All the projects included in the Genuino Starter Kit can be built without soldering.
The complete selection of sketches that will guide you through the 15 projects included in your kit are available in the Software (IDE). From your IDE, click on: File / Examples / 10.StarterKit_BasicKit.

Have a look at these video tutorials for a project-by-project walk-through.
Please note, projects are powered via USB by the connected computer during programming. A 9V battery clip is provided so that you can power the projects independently. A laser-cut wooden base allows you to keep the breadboard and Genuino Uno in place. An assortment of cardboard printed pieces give projects a clean and finished look, guiding users through the basics of making fully working devices.

For more information check out the Genuino Starter Kit Product Page.

View full details