Skip to product information
1 of 5

Seeed Studio

Seeed Studio CAN-BUS Shield V2

Seeed Studio CAN-BUS Shield V2

Regular price €29,99 EUR
Regular price Sale price €29,99 EUR
Sale Sold out
Tax included. Shipping calculated at checkout.

CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus. This CAN-BUS Shield adopts MCP2515 CAN Bus controller with SPI interface and MCP2551 CAN transceiver to give your Arduino/Seeeduino CAN-BUS capability. With an OBD-II converter cable added on and the OBD-II library imported, you are ready to build an onboard diagnostic device or data logger.

Previously we have made two versions of CAN-BUS Shield, the V1.0 and V1.2. They are all awesome shields that widely liked by our users. In order to make it better, several months ago we conducted a survey about CAN-BUS Shield V1.2 and received many valuable advices (Thanks to all the users who replied to us), so we decided to make an update and here it is - CAN-BUS Shield V2.
 
The CAN-BUS Shield V2 still uses MCP2515 as CAN-BUS controller and MCP2551 as CAN transceiver. Despite of that, there are really many updates. First and most importantly, OBD-II or CAN standard pinout can be selected by switching jumpers on DB9 interface, the default pinout is OBD-II. Secondly we add a TF card slot for data storage and the CS pin can be either set to D4 or D5. The INT pin can also be set to D2 or D3 by switching jumpers on the back of the shield. If you want to use more than 2 CAN-BUS Shield, it is needed to cut P1 pad. In V2, we moved the P1 pad from front to the back of the shield to make it easier to cut and solder. All in one, there are more options for customization.
 
Consider that the D0/D1 pin are usually used for downloading code, we changed the serial Grove connector to pin A0/A1. The I2C grove connector is also changed to more reasonable standard SDA/SCL pin instead of previous A4/A5. The two grove connectors are both changed to horizontal rather than vertical to the shield so that it would be more convenient when connecting to other grove modules.

Note

This CAN-Bus Shield works well with Arduino UNO (ATmega328), Arduino Mega (ATmega1280/2560) as well as Arduino Leonardo (ATmega32U4) and LinkIt One.

Features

  • Implements CAN V2.0B at up to 1 Mb/s    
  • Changeable chip select pin
  • Screw terminal that easily to connect CAN_H and CAN_L
  • Arduino Uno pin headers 
  • 2 Grove connectors (I2C and UART)
  • SPI Interface up to 10 MHz    
  • Standard (11 bit) and extended (29 bit) data and remote frames    
  • Two receive buffers with prioritized message storage    
  • Industrial standard 9 pin sub-D connector    
  • Two LED indicators    
View full details